[ProArt Display] Why can’t setting the resolution to 4K60hz when connected to ProArt display via USB Type-C cable?

ASUS Support FAQ

FAQ

Product PA279CV, PA329C

If you find that the resolution setting cannot be set to 4K60hz when connecting to ProArt series monitor via USB Type-C cable, only 4K30hz can be used,
Please open the OSD menu, and select System Setup -> USB Setup, change the setting to USB2.0, and try the setting again to set it to 4K60hz.

It's the limitation of the USB Type-C cable.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ

南宫28

FAQ

Was this information helpful?