[AIOT] Source Code Download Link Debian and Image Steps for Tinker Board 3N

• Source code:
  http://github.com/TinkerBoard-Linux/rockchip-linux-manifest/tree/linux5.10-rk356x (Debian)

• Uninstall old versions

$ sudo apt-get remove docker docker-engine docker.io containerd runc

• Install Docker Engine – Community

$ sudo apt-get update
$ sudo apt-get install apt-transport-http ca-certificates curl gnupg-agent software-properties-common
$ curl -fsSL http://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
$ sudo apt-key fingerprint 0EBFCD88
$ sudo add-apt-repository "deb [arch=amd64] http://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
$ sudo apt-get update
$ sudo apt-get install docker-ce docker-ce-cli containerd.io
$ sudo docker run hello-world

Reference: http://docs.docker.com/engine/install/ubuntu/

• Manage Docker as a non-root user

$ sudo groupadd docker
$ sudo usermod -aG docker $USER
$ newgrp docker
$ docker run hello-world

Reference: http://docs.docker.com/engine/install/linux-postinstall/

2. Download the source code:

$ repo init -u http://github.com/TinkerBoard-Linux/rockchip-linux-manifest.git -b linux5.10-rk356x

3. Code compiling

• Go to the directory where you have downloaded the code base and execute the script. This will take a while to install the necessary packages on the host and build the Docker image.

$ ./docker_builder/docker-builder-run.sh

Once the above is done, you are in the shell of the newly started Docker container as the following. You can start to issue commands as usual.

Options to run docker: --privileged --rm -it --volume /mnt/2T-disk/linux5.10-rk356x_0620:/source
your_usernmae@292c696527f6:/source$

• You can issue the following command to build all the images for Debian. All the images will be saved in the directory rockdev.

$ ./build.sh rockchip_rk3568_tinker_board_3n_debain_defconfig
$ ./build.sh

It will generate a file which named sdcard_full.img and located at [source tree]/rockdev/sdcard_full.img

• You can issue the following command to build all the images for Yocto. All the images will be saved in the directory rockdev.

$ ./build.sh rockchip_rk3568_tinker_board_3n_yocto_defconfig
$ ./build.sh

It will generate a file which named sdcard_full.img and located at [source tree]/rockdev/sdcard_full.img

4. Compiling u-boot/Kernel/Debian separately

• u-boot

$ ./build.sh uboot

It will generate a file which named uboot.img and located at [source tree]/u-boot/uboot.img

• Kernel

$ ./build.sh kernel

It will generate a file which named boot.img and located at [source tree]/kernel/boot.img

• Debian

$ ./build.sh debian

It will generate a file which named linaro-rootfs.img and located at [source tree]/debian/linaro-rootfs.img

• Yocto

$ ./build.sh yocto