[AIOT] Power Ignition Control for PV100A

  • Default value

Items

Default delay time (Seconds)

Ignition on delay

0

Ignition off delay

0

Hard off delay

180

 

 

 

 

 

 

 

 

  • Note:
    • When the ignition off delay ends, and the system has not shut down normally for more than 180 seconds, it will be forced to shut down.
    • Supported version：Yocto Image v1.0.7 (MCU FW V001.10.) and above. Debian Image v1.0.19 (MCU FW V001.10.) and above.
  • Setting commands
  • Ignition on
  • Check wakeup event: (ignition on event is enabled as default)
/MCU_test_tool/wakeup_source_test 2
 
  • Get delay value:
/MCU_test_tool/power_on_delay
 
  • Set delay value to 10 seconds:
/MCU_test_tool/power_on_delay 10
 
  • Ignition off
  • Set ignition off event:
/MCU_test_tool/wakeup_source_test 1 4
 
  • Check wakeup event:
/MCU_test_tool/wakeup_source_test 2
 
  • Get delay value:
/MCU_test_tool/ignition_off_delay
 
  • Set delay value to 30 seconds:
/MCU_test_tool/ignition_off_delay 30
 
  • Hard off
  • Get delay value:
/MCU_test_tool/power_off_delay
 
  • Set delay value to 10 seconds:
/MCU_test_tool/power_off_delay 10